AC/DC Car Clamp Leakage Current Tester
|FOB Price:||US $44 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $44/ Piece|
|Production Capacity:||5000 PCS/Month|
|Transport Package:||Nylon Bag+Color Bag|
|Payment Terms:||T/T, Western Union, Paypal|
- Model NO.: ETCR6200
- Voltage: 660mv/6.6V/66V/660V
- Display Mode: Four Digits LCD Display
- Measurement Range: 0mA~60.0A AC/DC
- Specification: IEC1010-1, IEC1010-2-032,pollution:2,CAT III(600V
- Display: Digital
- Test Mode: Clip-on CT, Integral Mode
- Test Position: Tested Wire in The Jaw Center
- Trademark: neutral
- Origin: Shenzhen, Guangdong Province, China
ETCR6200 AC/DC Leakage Current Clamp Meter also named: Car Leakage Current Clamp Meter, Car Standby Current Clamp Meter, Car Inrush current Tester, Car Charge Current Tester. It is specially designed for online measurement of AC/DC leakage current, current below 600V by adopting up-to-date CT technology and digital integration technology. It is especially suitable for measure car standby current, leakage current, inrush current. It is a product with the characteristic of relatively small size, high accuracy, strong anti-interference capability and automatic shifting. It is apply to car leakage rapid detection, consumed current detection, quickly find the fault of the wire broke leakage, equipment fled electric, line contact with iron, measuring the motor inrush current and alternator charge current etc. It could be widely use in those fields as car repair, car leave factory test, car parts test, the current detection in telecommunication room, electric power overhauling, meteorology, oil detection, etc.
It has those functions as peak holding, data holding and data storage. It obtains one RS232 interface, communication cable and software, through the computer, it can online real-time monitoring, historical query, dynamic display, MIN-AVG-MAX indication, alarm setting and indicating, data reading, saving and printing.
II. Technical Specification
Measurement of AC/DC current, leakage current, repairing the car circuit.
Zn-Mn dry battery,6F22,9V, continuous use for 30h
Clip-on CT, noncontact measurement
±2%rdg±5dgt (23ºC±5ºC, below 75%rh)
Four digits LCD display
35mm×21.5mm; display domain: 32mm×15mm
DC current auto identified and display"-"
Tested wire in the jaw center
Do not exceed AC 600V
Data stored in the memory of the meter via RS232 upload to PC
Baud rate:9600, data bit:8, stop bit:1, check bit: NONE
99 units, FULL blinks when the memory is full
DH indicating the reading is hold
Out of Range
OL indicating the current is out of range
5 Minutes after power on, it will power off automatically to lower the power consumption
Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed.
180g (including the battery)
Limit Temperature Error
-10ºC-0ºC and 40ºC-50ºC, within 2%rdg
AC 3700V/rms. (between the alloy of the clamp and the housing)
Applicable safety rules
IEC1010-1, IEC1010-2-032, pollution:2, CAT III(600V)
Meter: 1pc; toolkit: 1pc; RS232 communication line: 1pc; disk: 1pc; case: 1pc.